home | about Cooper Power Systems | C3 - Cooper Customer Center | Cooper Industries | contact us
Feeder Protection

idea™ iDP - Line Feeder Protection System

The Edison idea iDP provides complete feeder protection. Several different scheme files are available for a variety of overcurrent relay applications. Available protection functions include:

  • Phase, Ground, and Negative-Sequence instantaneous, definite time, and inverse time overcurrent
  • Directional phase and ground elements
  • Multiple-Step over/under frequency elements
  • Over/under voltage elements
  • Multiple-Shot programmable reclosing
  • Sync-check
  • Reverse Power
  • Breaker fail-to-trip and fail-to close detection
  • Fuse-Fail detection
  • Incipient Cable Splice Failure detector
  • Breaker monitoring
  • Catalog Section 165-210  

news_line.gif (833 bytes)

Edison IM30DRE Feeder Relay

The IM30DRE provides 50/51 and 50N/51N OC protection, negative sequence OC, four shot reclosing with sequence coordination, dual setting groups, auto cold load pick-up, fast bus trip logic, and breaker fail logic.

  • Catalog Section 150-15  
  • Instruction Manual S150-15-1  

news_line.gif (833 bytes)

Edison MU30 Measurement Unit

As a complement to the IM30DRE, the MU30 provides a full range of metering functions in the familiar Edison relay hardware, with all measurements available over Modbus and from the front panel. Measurements include voltages, currents, watts, vars, va, power factor, frequency, watt-hours, var-hours, va-hours, watt demand, var demand and va-demand. A pulsed output is also available for energy meters. The MU30 is ideal for situations where the use of protection class CTs is desired for the feeder relay, and separate higher accuracy metering class voltage and current transformers are used for measurements.

The MU30 and IM30DRE are available as a package factory mounted in a single, flush-mount case.

The IM30DRE and MU30 Combo

  • Catalog Section 150-75  
  • Instruction Manual S150-75-1