Three-Phase Hydraulic Reclosers
6H and V6H
Kyle® Types 6H and V6H three-phase, hydraulically controlled reclosers provide reliable, self-contained distribution-circuit overcurrent protection at low initial cost, and require minimal service.
Types 6H and V6H adapt three single-phase interrupting structures with a common lockout mechanism. In operation, these reclosers sense line current in each phase individually and trip individually; however, if one phase sequences to lockout, all phases lock out.
Tripping is initiated by a series-connected coil. Current-carrying and interrupting capacities vary with the operating coil's rating, which is selected to meet circuit requirements. A choice of dual time-current characteristics permits coordination with other protective devices. A non-reclosing feature (standard on all Kyle reclosers) is set with a hookstick-operated lever for one operation-to-lockout without removing the recloser from service.
Two types of interrupters are available:
- 6H reclosers: Current interruption takes place in oil.
- V6H reclosers: Equipped with vacuum interrupters.
These three-phase H-group reclosers are designed, tested, and rated for operation on three-phase systems with a maximum design voltage of 15.5 kV.
|
 |
Types E, 4E, V4E, H, 4H, V4H, L, V4L
Types D, DV
Types VXE, NOVA1
Types 6H, V6H
Types W, VW, WV, VWV
Type VSA
Types WE, WVE, VWE, VWVE
Type VSO
NOVA
NOVA-TS
NOVA STS
FXA / FXB
Form 3A
Form 4C
Form 5
Form 6
Recloser and Controls Library
|
